Thermoforming Machine To Make Food Containers Supplier – Food container production line – MACHINERY
Thermoforming Machine To Make Food Containers Supplier – Food container production line – MACHINERY Detail:
Main parameters
|
Item |
Unit |
Parameter |
Remark |
| Model |
FS-FPP75-90 |
||
| Applicable materials |
GPPS granule |
||
| Thickness of product |
mm |
1-4 |
|
| Width of sheet |
mm |
540–1100 |
|
| Foaming rate |
12-20 |
||
| Bulk weight of product |
Kg/m³ |
50-83 |
|
| Thermal conductivity of product |
W/m.k |
0.021-0.038 |
|
| Output |
kg/h |
70-90 |
|
| Rated power |
Kw |
140 |
|
| Power supply |
three phase 380v/50Hz |
||
| External dimension |
mm |
24000×6000×2800 |
|
| Complete machine weight |
Ton |
About10 |
Ⅰ 75/90 PS foam sheet extrusion line includes the following components
1. Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
|
| Motor Power of the mixer（kw） |
3 |
|
| Feeding capacity of the feeder (kg/h) |
200 |
|
| Motor power of the feeder (kw) |
1.5 |
2 The first stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
⑶ Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
⑷ Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
⑸ Technical parameters
| Driving motor power（kw） |
37 |
 |
| Diameter of screw bolt （mm） |
Φ70 |
|
| L/D ratio of screw bolt |
32：1 |
|
| Max rev of screw （rpm） |
60 |
|
| Number of heating zones |
7 |
|
| Heating power （kw） |
28 |
4 Non-stop machine hydraulic automatic replace filter system
Non-stop hydraulic quickly net changing device
Main parameters
| Oil pump motor power （kw） |
4 |
  |
| Oil pump max pressure （Mpa） |
20 |
|
| Filter net quantity（piece） |
4 |
|
| Heating power （kw） |
5 The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
⑶ Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
⑷ Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
⑸ Cooling and temperature-reduction style
Circulating water cooling，automatic bypass system.
⑹ Technical parameters
| Driving motor power （kw） |
45 |
 |
| Diameter of screw bolt （mm） |
Φ90 |
|
| L/D ratio of screw bolt |
34：1 |
|
| Max rev of screw （rpm） |
30 |
|
| Number of heating zones |
8 |
|
| Heating power（kw） |
40 |
6 Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2. Material
：Ra0.025μm:
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
⑶ Main technical data
| Diameter of mold orifice | according to the order contract |  |
| Quantity of temperature control zones |
2 |
|
| Accuracy of temperature control（℃） |
±1 |
|
| Heating power（kw） |
5 |
7 Shaping cooling and cutting system
1. Shaping style：shaping barrel
2. Cooling style：shaping barrel cools with water and external wind-ring
⑶Structure：shaping barrel, cutting knife and rack components
⑷Main technical parameters
| Shaping barrel size（mm） | According to the order contract |  |
| Blower power （kw） | Three phrase 0.55 |
8 Pulling system
1. Pulling style：four-roller parallel pull
2. Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
⑶ Main parameters
| Pulling roller quantity（piece） |
4 |
 |
| Pulling roller size （mm） |
Φ260×1300 |
|
| Motor power（kw） |
1.5 |
9 Electrostatic elimination system
| Adopt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger. |  |
10 Winding system
1. Form
Double-arm air shaft type
2. Main technical parameters
| Coiling weight（kg） | Maximum40 |  |
| Coiling diameter（mm） | Max 1100 | |
| Length control | Meter counter control, adjust length | |
| Driving motor | Torque motor 8n.m×4sets |
11 Electric control system
| extruder heating control cabinet |
One set |
  |
| The second stage extruder heating control cabinet | One set | |
| winding control cabinet | One set |
Ⅲ Production flow chart
Ⅳ Details of foam sheet extrusion line
A. Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
| Motor Power of the mixer（kw） |
3 |
| Feeding capacity of the feeder (kg/h) |
200 |
| Motor power of the feeder (kw) |
1.5 |
B. The first stage extruder
1.Screw and barrel materials
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
5. Technical parameters
| Driving motor power（kw） |
37 |
| Diameter of screw bolt（mm） |
Φ70 |
| L/D ratio of screw bolt |
32：1 |
| Max rev of screw（rpm） |
50 |
| Number of heating zones |
7 |
| Heating power （kw） |
28 |
C. Blowing agent injecting system
1. Sort of pump
Plunger type high precision and high pressure measuring pump, to match one-way valve to control, the injection volume is controlled by plunger lift
2. Main technical parameters
| Sort of blowing agent |
butane or LPG |
| Metering pump flow |
40（L／H） |
| Injection high pressure |
30（Mpa） |
| Pressure gauge |
0-40（Mpa） |
| Motor power |
3（kw） |
D. Non-stop machine hydraulic automatic replace filter system
Hydraulic quickly net changing device
Main parameters
| Oil pump motor power |
4（kw） |
| Oil pump max pressure |
20（Mpa） |
| Filter net quantity |
4（piece） |
| Heating power |
8（kw） |
E. The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature ，Cooling water device in heater .
5. Cooling and temperature-reduction style
Circulating water cooling ，automatic bypass system.
6. Technical parameters
| Driving motor power（kw） |
45 |
| Diameter of screw bolt（mm） |
Φ120 |
| L/D ratio of screw bolt |
34：1 |
| Max rev of screw（rpm） |
50 |
| Number of heating zones |
8 |
| Heating power（kw） |
40 |
F．Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2. Material Ra0.025μm:
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
3. Main technical data
| Diameter of mold orifice |
According to the order contract |
| Quantity of temperature control zones |
1 |
| Accuracy of temperature control |
±1（℃） |
| Heating power |
5（kw） |
G. Shaping cooling and cutting system
1. Shaping style：shaping barrel
2. Cooling style：shaping barrel cools with water and external wind-ring
3.Structure：shaping barrel, cutting knife and rack components
4. Main technical parameters
| Shaping barrel size（mm） |
According to the order contract |
| Blower power（kw） |
Three phrase0.55 |
H. Pulling system
1.Pulling style：four-roller parallel pull, compress with air drive
2.Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
3. Main parameters
| Pulling roller quantity（piece） |
4 |
| Pulling roller size （mm） |
Φ260×1300 |
| Motor power （kw） |
1.5 |
I. Electrostatic elimination system
Adopt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger.
J. Winding system
1.Form
Double-arm air shaft type
2. Main technical parameters
| Coiling weight（kg） | Maximum40 |
| Coiling diameter （mm） | Max 1100 |
| Length control | Meter counter control, adjust length |
| Driving motor | Torque motor 8n.m×2 sets |
K. Electric control system
Heating control cabinet of the first stage extruder：one set
Heating control cabinet of the second stage extruder：one set
Winding control cabinet：one set
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for Thermoforming Machine To Make Food Containers Supplier – Food container production line – MACHINERY , The product will supply to all over the world, such as: Netherlands, Kenya, Vietnam, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we are going to have a bright prospect and to be distributed all over the world in the years to come.
By Jill from Australia - 2017.10.25 15:53
High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
By Jodie from luzern - 2018.09.29 13:24
Related products
-
China High Quality Plastic Foam Tableware Machi...
Ⅰ 105/120 PS foam sheet extrusion line includes the following components Ⅱ Main parameters Item Unit Parameter Remark Model FS-FPP105-120 Applicable materials GPPS granule Thickness of product mm 1-4 Width of sheet mm 540-1200 Foaming rate 12-20 Bulk weight of product Kg/m³ 50-83 Thermal conductivity of product W/m.k 0.021-0.038 Output kg/h 150-200 Rated power Kw 200 Power supply three phase 380v/50Hz External d...
-
China High Quality Full Servo Sanitary Napkin M...
Ⅲ.main point 1. Adapt PLC control the whole machine, operate the machine by touch screen 2. the conveyor belt can absorb the product, when it is run high speed, it will not fly 3. Cutter adapt pressure spring protect the knife from overload pressure 4. edge sealing ADL and cutter adapt the air cylinder protect the device 5. Main machine adapt frequency control the speed 6. main machine adapt bearing, timing belt, right angle gearbox, eruptional box drive 7. Cutter, ADL, edge sealing, easy qui...
-
China High Quality 2 Color Flexo Printing Machi...
UNWINDING PART。 1. Single feeding work station 2. Hydraulic clamp,hydraulic lift the material，hydraulic control the unwinding material width，it can adjust left and right movement. 3. Magnetic powder brake auto tension control 4. Auto web guide 5.Pneumatic brake—40kgs PRINTING PART 1. Pneumatic lifting and lowing printing plate cylinders auto lifting plate cylinder when the machine is stopped. After that can run ink automatically. When the machine is opening,it will make alarm to...
-
Loop Handle Bag Machine Suppliers – Hig...
main feature 1.Using Willon touch screen man-machine interface, the operation function is clear at a glance, easy to control 2.Adopt the Japanese original Mitsubishi motion controller, through the integration with the optical fiber, operation stability 3.Japanese Mitsubishi servo motor with German Schick color standard eye correction, accurate tracking printing bag size 4.The raw material loading and unloading adopts hydraulic dynamic lifting structure, and the unwinding adopts automatic cons...
-
Eco Bag Making Machine Manufacturer – H...
main feature 1.Using Willon touch screen man-machine interface, the operation function is clear at a glance, easy to control 2.Adopt the Japanese original Mitsubishi motion controller, through the integration with the optical fiber, operation stability 3.Japanese Mitsubishi servo motor with German Schick color standard eye correction, accurate tracking printing bag size 4.The raw material loading and unloading adopts hydraulic dynamic lifting structure, and the unwinding adopts automatic cons...
-
4/6/8 Color Flexo Printing Machine Factory R...
CONTROL PART 1.Double work station. 2.3 inch air shaft. 3.Magnetic powder brake auto tension control. 4.Auto web guide. UNWINDING PART 1.Double work station. 2.3 inch air shaft. 3.Magnetic powder brake auto tension control. 4.Auto web guide PRINTING PART 1. Pneumatic lifting and lowing printing plate cylinders auto lifting plate cylinder when the machine is stopped. After that can run ink automatically. When the machine is opening,it will make alarm to start the auto lowering plate printing c...
