Ps Food Container Production Line Factories – PS fast food box line – MACHINERY
Ps Food Container Production Line Factories – PS fast food box line – MACHINERY Detail:
Ⅰ 105/120 PS foam sheet extrusion line includes the following components
Ⅱ Main parameters
|
Item |
Unit |
Parameter |
Remark |
| Model |
FS-FPP105-120 |
||
| Applicable materials |
GPPS granule |
||
| Thickness of product |
mm |
1-4 |
|
| Width of sheet |
mm |
540-1200 |
|
| Foaming rate |
12-20 |
||
| Bulk weight of product |
Kg/m³ |
50-83 |
|
| Thermal conductivity of product |
W/m.k |
0.021-0.038 |
|
| Output |
kg/h |
150-200 |
|
| Rated power |
Kw |
200 |
|
| Power supply |
three phase 380v/50Hz |
||
| External dimension |
mm |
26000×7000×3000 |
|
| Complete machine weight |
Ton |
About12 |
Ⅲ Production flow chart
A． Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
| Motor Power of the mixer（kw） |
3 |
| Feeding capacity of the feeder (kg/h) |
200 |
| Motor power of the feeder (kw) |
1.5 |
B. The first stage extruder
1. Screw and barrel materials
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
5. Technical parameters
| Driving motor power（kw） |
55 |
| Diameter of screw bolt（mm） |
Φ105 |
| L/D ratio of screw bolt |
34：1 |
| Max rev of screw（rpm） |
30 |
| Number of heating zones | 10 |
| Heating power （kw） |
40 |
C． Blowing agent injecting system
1. Sort of pump
Plunger type high precision and high pressure measuring pump, to match one-way valve to control, the injection volume is controlled by plunger lift
2. Main technical parameters
| Sort of blowing agent |
butane or LPG |
| Metering pump flow |
40（L／H） |
| Injection high pressure |
30（Mpa） |
| Pressure gauge |
0-40（Mpa） |
| Motor power |
3（kw） |
D． Non-stop machine hydraulic automatic replace filter system
Hydraulic quickly net changing device
Main parameters
| Oil pump motor power |
4（kw） |
| Oil pump max pressure |
20（Mpa） |
| Filter net quantity |
4（piece） |
| Heating power |
8（kw） |
E． The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature ，Cooling water device in heater .
5. Cooling and temperature-reduction style Circulating water cooling ，automatic bypass system.
6. Technical parameters
| Driving motor power（kw） |
55 |
| Diameter of screw bolt（mm） |
Φ120 |
| L/D ratio of screw bolt |
34：1 |
| Max rev of screw（rpm） |
30 |
| Number of heating zones |
13 |
| Heating power（kw） |
50 |
6. Technical parameters
F. Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2.Material
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
3. Main technical data
| Diameter of mold orifice |
According to the order contract |
| Quantity of temperature control zones |
2 |
| Accuracy of temperature control |
±1（℃） |
| Heating power |
5（kw） |
G. Shaping cooling and cutting system
1. Shaping style：shaping barrel
2.Cooling style：shaping barrel cools with water and external wind-ring
3.Structure：shaping barrel, cutting knife and rack components
4.Main technical parameters
| Shaping barrel size（mm） |
According to the order contract |
| Blower power（kw） |
Three phrase0.55 |
H． Pulling system
1.Pulling style：four-roller parallel pull, compress with air drive
2.Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
3. Main parameters
| Pulling roller quantity（piece） |
4 |
| Pulling roller size （mm） |
Φ260×1300 |
| Motor power （kw） |
1.5 |
I. Electrostatic elimination system
Adapt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger.
J.Winding system
1.Form
Double-arm air shaft type
2.Main technical parameters
| Coiling weight（kg） | Maximum40 |
| Coiling diameter （mm） | Max 1100 |
| Length control | Meter counter control, adjust length |
| Driving motor | Torque motor 8n.m×2 sets |
K. Electric control system
Heating control cabinet of the first stage extruder：one set
Heating control cabinet of the second stage extruder：one set
Winding control cabinet：one set
Product detail pictures:
Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Ps Food Container Production Line Factories – PS fast food box line – MACHINERY , The product will supply to all over the world, such as: Japan, Botswana, Italy, Adhering to the management tenet of "Managing Sincerely, Winning by Quality", we try our best to provide excellent products and service to our clients. We look forward to making progress together with domestic and international clients.
By Freda from French - 2017.08.15 12:36
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Kevin Ellyson from moldova - 2018.02.21 12:14
Related products
-
China High Quality Loop Handle Bag Machine Fact...
1. The machine is easy to operate and can produce paper handles with high speed usually reach 170 pairs per minute. 2. We design and offer the optional auto-production line, which can automatic gluing replace the human gluing procedure so that help to reduce lots of labor cost. It is strongly advice the paper bag producing factory use the auto-produce line that also support customize. 3. The unit paper bag can lift the heavy things of 15 kg at most, when the tension of raw materials reaches a...
-
China High Quality Paper Plate Forming Machine ...
Technical Parameter Main Technical Parameters Paper Plate Size 4-13” Paper Grams 100-800g/m2 Paper Materials Base paper, whiteboard paper, white cardboard, aluminum foil paper or others Capacity Double Stations 40-110pcs/min Power Requirements 380V 50HZ Total Power 8KW Weight 1600kg Specifications 3700×1200×2000mm Air Supply Requirement 0.4Mpa, 0.3cube/min Other Notes Customize Oil Cylinder ML-63-150-5T-X Cylinder Stro...
-
Pp Spunbond Nonwoven Machine Manufacturers R...
1）Fabric Roll Unwinding Auto loading material roll(lift by cylinders) Inflatable shaft to fix the fabric roll when machine working Auto stop when material run out of Magnetic powder tension controller Auto rectifying deviation system(EPC box and web guider) Bag mouth folding and sealing by ultrasonic welding Cylinders to lift and fix the sealing mold Custom-made sealing mould is available 2）Bag Bottom Gusset And Side Gusset Forming – compressed air input here Two sets round wheels for...
-
Cup Printing Machine Manufacturer – 6 c...
CONTROL PART 1.Double work station. 2.3 inch air shaft. 3.Magnetic powder brake auto tension control. 4.Auto web guide. UNWINDING PART 1.Double work station. 2.3 inch air shaft. 3.Magnetic powder brake auto tension control. 4.Auto web guide PRINTING PART 1. Pneumatic lifting and lowing printing plate cylinders auto lifting plate cylinder when the machine is stopped. After that can run ink automatically. When the machine is opening,it will make alarm to start the auto lowering plate printing c...
-
China High Quality Ps Food Container Production...
Ⅰ 105/120 PS foam sheet extrusion line includes the following components Ⅱ Main parameters Item Unit Parameter Remark Model FS-FPP105-120 Applicable materials GPPS granule Thickness of product mm 1-4 Width of sheet mm 540-1200 Foaming rate 12-20 Bulk weight of product Kg/m³ 50-83 Thermal conductivity of product W/m.k 0.021-0.038 Output kg/h 150-200 Rated power Kw 200 Power supply three phase 380v/50Hz External d...
-
Printer Machine Factory – 4 color pape...
UNWINDING PART。 1. Single feeding work station 2. Hydraulic clamp,hydraulic lift the material，hydraulic control the unwinding material width，it can adjust left and right movement. 3. Magnetic powder brake auto tension control 4. Auto web guide 5.Pneumatic brake—40kgs PRINTING PART 1. Pneumatic lifting and lowing printing plate cylinders auto lifting plate cylinder when the machine is stopped. After that can run ink automatically. When the machine is opening,it will make alarm to...
