Plastic Sheet Making Machine Supplier – Food container production line – MACHINERY
Plastic Sheet Making Machine Supplier – Food container production line – MACHINERY Detail:
Main parameters
|
Item |
Unit |
Parameter |
Remark |
| Model |
FS-FPP75-90 |
||
| Applicable materials |
GPPS granule |
||
| Thickness of product |
mm |
1-4 |
|
| Width of sheet |
mm |
540–1100 |
|
| Foaming rate |
12-20 |
||
| Bulk weight of product |
Kg/m³ |
50-83 |
|
| Thermal conductivity of product |
W/m.k |
0.021-0.038 |
|
| Output |
kg/h |
70-90 |
|
| Rated power |
Kw |
140 |
|
| Power supply |
three phase 380v/50Hz |
||
| External dimension |
mm |
24000×6000×2800 |
|
| Complete machine weight |
Ton |
About10 |
Ⅰ 75/90 PS foam sheet extrusion line includes the following components
1. Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
|
| Motor Power of the mixer（kw） |
3 |
|
| Feeding capacity of the feeder (kg/h) |
200 |
|
| Motor power of the feeder (kw) |
1.5 |
2 The first stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
⑶ Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
⑷ Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
⑸ Technical parameters
| Driving motor power（kw） |
37 |
 |
| Diameter of screw bolt （mm） |
Φ70 |
|
| L/D ratio of screw bolt |
32：1 |
|
| Max rev of screw （rpm） |
60 |
|
| Number of heating zones |
7 |
|
| Heating power （kw） |
28 |
4 Non-stop machine hydraulic automatic replace filter system
Non-stop hydraulic quickly net changing device
Main parameters
| Oil pump motor power （kw） |
4 |
  |
| Oil pump max pressure （Mpa） |
20 |
|
| Filter net quantity（piece） |
4 |
|
| Heating power （kw） |
5 The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
⑶ Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
⑷ Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
⑸ Cooling and temperature-reduction style
Circulating water cooling，automatic bypass system.
⑹ Technical parameters
| Driving motor power （kw） |
45 |
 |
| Diameter of screw bolt （mm） |
Φ90 |
|
| L/D ratio of screw bolt |
34：1 |
|
| Max rev of screw （rpm） |
30 |
|
| Number of heating zones |
8 |
|
| Heating power（kw） |
40 |
6 Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2. Material
：Ra0.025μm:
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
⑶ Main technical data
| Diameter of mold orifice | according to the order contract |  |
| Quantity of temperature control zones |
2 |
|
| Accuracy of temperature control（℃） |
±1 |
|
| Heating power（kw） |
5 |
7 Shaping cooling and cutting system
1. Shaping style：shaping barrel
2. Cooling style：shaping barrel cools with water and external wind-ring
⑶Structure：shaping barrel, cutting knife and rack components
⑷Main technical parameters
| Shaping barrel size（mm） | According to the order contract |  |
| Blower power （kw） | Three phrase 0.55 |
8 Pulling system
1. Pulling style：four-roller parallel pull
2. Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
⑶ Main parameters
| Pulling roller quantity（piece） |
4 |
 |
| Pulling roller size （mm） |
Φ260×1300 |
|
| Motor power（kw） |
1.5 |
9 Electrostatic elimination system
| Adopt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger. |  |
10 Winding system
1. Form
Double-arm air shaft type
2. Main technical parameters
| Coiling weight（kg） | Maximum40 |  |
| Coiling diameter（mm） | Max 1100 | |
| Length control | Meter counter control, adjust length | |
| Driving motor | Torque motor 8n.m×4sets |
11 Electric control system
| extruder heating control cabinet |
One set |
  |
| The second stage extruder heating control cabinet | One set | |
| winding control cabinet | One set |
Ⅲ Production flow chart
Ⅳ Details of foam sheet extrusion line
A. Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
| Motor Power of the mixer（kw） |
3 |
| Feeding capacity of the feeder (kg/h) |
200 |
| Motor power of the feeder (kw) |
1.5 |
B. The first stage extruder
1.Screw and barrel materials
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
5. Technical parameters
| Driving motor power（kw） |
37 |
| Diameter of screw bolt（mm） |
Φ70 |
| L/D ratio of screw bolt |
32：1 |
| Max rev of screw（rpm） |
50 |
| Number of heating zones |
7 |
| Heating power （kw） |
28 |
C. Blowing agent injecting system
1. Sort of pump
Plunger type high precision and high pressure measuring pump, to match one-way valve to control, the injection volume is controlled by plunger lift
2. Main technical parameters
| Sort of blowing agent |
butane or LPG |
| Metering pump flow |
40（L／H） |
| Injection high pressure |
30（Mpa） |
| Pressure gauge |
0-40（Mpa） |
| Motor power |
3（kw） |
D. Non-stop machine hydraulic automatic replace filter system
Hydraulic quickly net changing device
Main parameters
| Oil pump motor power |
4（kw） |
| Oil pump max pressure |
20（Mpa） |
| Filter net quantity |
4（piece） |
| Heating power |
8（kw） |
E. The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature ，Cooling water device in heater .
5. Cooling and temperature-reduction style
Circulating water cooling ，automatic bypass system.
6. Technical parameters
| Driving motor power（kw） |
45 |
| Diameter of screw bolt（mm） |
Φ120 |
| L/D ratio of screw bolt |
34：1 |
| Max rev of screw（rpm） |
50 |
| Number of heating zones |
8 |
| Heating power（kw） |
40 |
F．Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2. Material Ra0.025μm:
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
3. Main technical data
| Diameter of mold orifice |
According to the order contract |
| Quantity of temperature control zones |
1 |
| Accuracy of temperature control |
±1（℃） |
| Heating power |
5（kw） |
G. Shaping cooling and cutting system
1. Shaping style：shaping barrel
2. Cooling style：shaping barrel cools with water and external wind-ring
3.Structure：shaping barrel, cutting knife and rack components
4. Main technical parameters
| Shaping barrel size（mm） |
According to the order contract |
| Blower power（kw） |
Three phrase0.55 |
H. Pulling system
1.Pulling style：four-roller parallel pull, compress with air drive
2.Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
3. Main parameters
| Pulling roller quantity（piece） |
4 |
| Pulling roller size （mm） |
Φ260×1300 |
| Motor power （kw） |
1.5 |
I. Electrostatic elimination system
Adopt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger.
J. Winding system
1.Form
Double-arm air shaft type
2. Main technical parameters
| Coiling weight（kg） | Maximum40 |
| Coiling diameter （mm） | Max 1100 |
| Length control | Meter counter control, adjust length |
| Driving motor | Torque motor 8n.m×2 sets |
K. Electric control system
Heating control cabinet of the first stage extruder：one set
Heating control cabinet of the second stage extruder：one set
Winding control cabinet：one set
Product detail pictures:
Related Product Guide:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for Plastic Sheet Making Machine Supplier – Food container production line – MACHINERY , The product will supply to all over the world, such as: Bolivia, Colombia, Mauritius, We have constructed strong and long co-operation relationship with an enormous quantity of companies within this business in Kenya and overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Kenya for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
By Irene from Nepal - 2017.06.29 18:55
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Julie from Southampton - 2018.06.26 19:27
Related products
-
China High Quality Lady Sanitary Napkin Machine...
Ⅲ.main point 1. Adapt PLC control the whole machine, operate the machine by touch screen 2. the conveyor belt can absorb the product, when it is run high speed, it will not fly 3. Cutter adapt pressure spring protect the knife from overload pressure 4. edge sealing ADL and cutter adapt the air cylinder protect the device 5. Main machine adapt frequency control the speed 6. main machine adapt bearing, timing belt, right angle gearbox, eruptional box drive 7. Cutter, ADL, edge sealing, easy qui...
-
China High Quality Melt Blown Making Machine Fa...
C. Public project 1. Water supplication Pressure 2-4Bar Temperature ≤28℃ PH : 6.5~9.2 Turbidity ＜10PPm 2. Compressed air Operation pressure : 4-6Bar Allow range : ±0.2Bar Dew point temperature :＜25℃ Prevision : 1m3 A. Characteristics model no 1600MM S 2400MM S 3200MM S Capacity 4-6 T/ DAY 5-7 T/DAY 8-10 T/DAY Voltage 240V OR 415V/50HZ 240V OR 415V/50HZ 240VOR 415V/50HZ Installed power 350 kw 400kw 500kw Running power 300 kw 360 kw 480 kw effective width 1600MM ...
-
Nonwoven Fabric Making Machine Suppliers –...
-with online D-cut punching -with shoes bag/bottom gusset and side gusset -with online T-shirt bag auto punching Adjustable photoelectric sensor for printing color mark tracking( it can be turned on/off on the touch screen) Online D-cut punching drawstring bag punching bag side sealing by ultrasonic welding Durable cold cutter Sealing mould with heating device inside(temperature control by thermal indicator) static eliminator device Double stepping motor feeding system for bag length fix Man ...
-
Nonwoven Machinery Factory – Semi-auto ...
Main technical parameters: Model LH-U700 Handle Loop Length 380-600mm Material Basis weight(thickness) 40-100g/m² Production Speed 5-20pcs/min Power Supply 220V50HZ Total Power 5kw Overall Dimension 2100*1200*1500mm Weight 450KG
-
Food Thermoform Vacuum Machine Supplier –...
Main parameters Item Unit Parameter Remark Model FS-FPP75-90 Applicable materials GPPS granule Thickness of product mm 1-4 Width of sheet mm 540–1100 Foaming rate 12-20 Bulk weight of product Kg/m³ 50-83 Thermal conductivity of product W/m.k 0.021-0.038 Output kg/h 70-90 Rated power Kw 140 Power supply three phase 380v/50Hz External dimension mm 24000×6000×2800 Complete machine weight Ton About10 ...
-
Pp Spunbond Nonwoven Machine Factories – ...
Main technical parameters: Model LH-U700 Handle Loop Length 380-600mm Material Basis weight(thickness) 40-100g/m² Production Speed 5-20pcs/min Power Supply 220V50HZ Total Power 5kw Overall Dimension 2100*1200*1500mm Weight 450KG
