China High Quality Lunch Box Making Machine Factory – Food container production line – MACHINERY
China High Quality Lunch Box Making Machine Factory – Food container production line – MACHINERY Detail:
Main parameters
|
Item |
Unit |
Parameter |
Remark |
| Model |
FS-FPP75-90 |
||
| Applicable materials |
GPPS granule |
||
| Thickness of product |
mm |
1-4 |
|
| Width of sheet |
mm |
540–1100 |
|
| Foaming rate |
12-20 |
||
| Bulk weight of product |
Kg/m³ |
50-83 |
|
| Thermal conductivity of product |
W/m.k |
0.021-0.038 |
|
| Output |
kg/h |
70-90 |
|
| Rated power |
Kw |
140 |
|
| Power supply |
three phase 380v/50Hz |
||
| External dimension |
mm |
24000×6000×2800 |
|
| Complete machine weight |
Ton |
About10 |
Ⅰ 75/90 PS foam sheet extrusion line includes the following components
1. Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
|
| Motor Power of the mixer（kw） |
3 |
|
| Feeding capacity of the feeder (kg/h) |
200 |
|
| Motor power of the feeder (kw) |
1.5 |
2 The first stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
⑶ Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
⑷ Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
⑸ Technical parameters
| Driving motor power（kw） |
37 |
 |
| Diameter of screw bolt （mm） |
Φ70 |
|
| L/D ratio of screw bolt |
32：1 |
|
| Max rev of screw （rpm） |
60 |
|
| Number of heating zones |
7 |
|
| Heating power （kw） |
28 |
4 Non-stop machine hydraulic automatic replace filter system
Non-stop hydraulic quickly net changing device
Main parameters
| Oil pump motor power （kw） |
4 |
  |
| Oil pump max pressure （Mpa） |
20 |
|
| Filter net quantity（piece） |
4 |
|
| Heating power （kw） |
5 The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
⑶ Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
⑷ Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
⑸ Cooling and temperature-reduction style
Circulating water cooling，automatic bypass system.
⑹ Technical parameters
| Driving motor power （kw） |
45 |
 |
| Diameter of screw bolt （mm） |
Φ90 |
|
| L/D ratio of screw bolt |
34：1 |
|
| Max rev of screw （rpm） |
30 |
|
| Number of heating zones |
8 |
|
| Heating power（kw） |
40 |
6 Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2. Material
：Ra0.025μm:
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
⑶ Main technical data
| Diameter of mold orifice | according to the order contract |  |
| Quantity of temperature control zones |
2 |
|
| Accuracy of temperature control（℃） |
±1 |
|
| Heating power（kw） |
5 |
7 Shaping cooling and cutting system
1. Shaping style：shaping barrel
2. Cooling style：shaping barrel cools with water and external wind-ring
⑶Structure：shaping barrel, cutting knife and rack components
⑷Main technical parameters
| Shaping barrel size（mm） | According to the order contract |  |
| Blower power （kw） | Three phrase 0.55 |
8 Pulling system
1. Pulling style：four-roller parallel pull
2. Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
⑶ Main parameters
| Pulling roller quantity（piece） |
4 |
 |
| Pulling roller size （mm） |
Φ260×1300 |
|
| Motor power（kw） |
1.5 |
9 Electrostatic elimination system
| Adopt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger. |  |
10 Winding system
1. Form
Double-arm air shaft type
2. Main technical parameters
| Coiling weight（kg） | Maximum40 |  |
| Coiling diameter（mm） | Max 1100 | |
| Length control | Meter counter control, adjust length | |
| Driving motor | Torque motor 8n.m×4sets |
11 Electric control system
| extruder heating control cabinet |
One set |
  |
| The second stage extruder heating control cabinet | One set | |
| winding control cabinet | One set |
Ⅲ Production flow chart
Ⅳ Details of foam sheet extrusion line
A. Automatic feeding system
1. Feeding style
Spiral feeding
2. Main parameters
| Hopper capacity of the mixer (kg) |
300 |
| Motor Power of the mixer（kw） |
3 |
| Feeding capacity of the feeder (kg/h) |
200 |
| Motor power of the feeder (kw) |
1.5 |
B. The first stage extruder
1.Screw and barrel materials
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motors with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature
5. Technical parameters
| Driving motor power（kw） |
37 |
| Diameter of screw bolt（mm） |
Φ70 |
| L/D ratio of screw bolt |
32：1 |
| Max rev of screw（rpm） |
50 |
| Number of heating zones |
7 |
| Heating power （kw） |
28 |
C. Blowing agent injecting system
1. Sort of pump
Plunger type high precision and high pressure measuring pump, to match one-way valve to control, the injection volume is controlled by plunger lift
2. Main technical parameters
| Sort of blowing agent |
butane or LPG |
| Metering pump flow |
40（L／H） |
| Injection high pressure |
30（Mpa） |
| Pressure gauge |
0-40（Mpa） |
| Motor power |
3（kw） |
D. Non-stop machine hydraulic automatic replace filter system
Hydraulic quickly net changing device
Main parameters
| Oil pump motor power |
4（kw） |
| Oil pump max pressure |
20（Mpa） |
| Filter net quantity |
4（piece） |
| Heating power |
8（kw） |
E. The second stage extruder
1. Screw and barrel material
38CrMoAlA nitrogen treatment
2. Main motor style
AC-motor with frequency converters
3. Speed reducer
Extruder dedicated reducer，hard tooth surface，high torque，and low noise
4. Heater
Aluminum casted heater, solid-state relay contactless output, intelligent temperature controller control temperature ，Cooling water device in heater .
5. Cooling and temperature-reduction style
Circulating water cooling ，automatic bypass system.
6. Technical parameters
| Driving motor power（kw） |
45 |
| Diameter of screw bolt（mm） |
Φ120 |
| L/D ratio of screw bolt |
34：1 |
| Max rev of screw（rpm） |
50 |
| Number of heating zones |
8 |
| Heating power（kw） |
40 |
F．Extruder head and mold
1. Structure
Round of the extruder head，mold mouth can adjust，head with a pressure gauge and pressure output alarm device. The head heater with water cooling .
2. Material Ra0.025μm:
High quality tool steel，heat-treated，flow channel surface roughness： Ra0.025μm
3. Main technical data
| Diameter of mold orifice |
According to the order contract |
| Quantity of temperature control zones |
1 |
| Accuracy of temperature control |
±1（℃） |
| Heating power |
5（kw） |
G. Shaping cooling and cutting system
1. Shaping style：shaping barrel
2. Cooling style：shaping barrel cools with water and external wind-ring
3.Structure：shaping barrel, cutting knife and rack components
4. Main technical parameters
| Shaping barrel size（mm） |
According to the order contract |
| Blower power（kw） |
Three phrase0.55 |
H. Pulling system
1.Pulling style：four-roller parallel pull, compress with air drive
2.Driving motor form：AC-motor, frequency conversion velocity modulation, speed reducer changes speed
3. Main parameters
| Pulling roller quantity（piece） |
4 |
| Pulling roller size （mm） |
Φ260×1300 |
| Motor power （kw） |
1.5 |
I. Electrostatic elimination system
Adopt to tod type ion rod electrostatic elimination system, working volt is 7KV above, can produce high effective and powerful ion wind, effectively eliminate electrostatic danger.
J. Winding system
1.Form
Double-arm air shaft type
2. Main technical parameters
| Coiling weight（kg） | Maximum40 |
| Coiling diameter （mm） | Max 1100 |
| Length control | Meter counter control, adjust length |
| Driving motor | Torque motor 8n.m×2 sets |
K. Electric control system
Heating control cabinet of the first stage extruder：one set
Heating control cabinet of the second stage extruder：one set
Winding control cabinet：one set
Product detail pictures:
Related Product Guide:
We've one of the most advanced generation tools, experienced and qualified engineers and workers, recognized good quality manage systems and a friendly skilled product sales workforce pre/after-sales support for China High Quality Lunch Box Making Machine Factory – Food container production line – MACHINERY , The product will supply to all over the world, such as: Accra, Frankfurt, Georgia, Our company has already have pass the ISO standard and we're fully respect our customer 's patents and copyrights. If the customer provides their own designs, We will guarantee that they will likely be the only one can have that merchandise. We hoping that with our good products can bring our customers a great fortune.
By Jean from Portugal - 2018.10.01 14:14
The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
By Alan from Ghana - 2017.02.18 15:54
Related products
-
Plastic Tray Forming Machine Factories – ...
Main parameters Item Unit Parameter Remark Model FS-FPP75-90 Applicable materials GPPS granule Thickness of product mm 1-4 Width of sheet mm 540–1100 Foaming rate 12-20 Bulk weight of product Kg/m³ 50-83 Thermal conductivity of product W/m.k 0.021-0.038 Output kg/h 70-90 Rated power Kw 140 Power supply three phase 380v/50Hz External dimension mm 24000×6000×2800 Complete machine weight Ton About10 ...
-
China High Quality Kraf Paper Bag Making Machin...
main feature 1.Using Willon touch screen man-machine interface, the operation function is clear at a glance, easy to control 2.Adopt the Japanese original Mitsubishi motion controller, through the integration with the optical fiber, operation stability 3.Japanese Mitsubishi servo motor with German Schick color standard eye correction, accurate tracking printing bag size 4.The raw material loading and unloading adopts hydraulic dynamic lifting structure, and the unwinding adopts automatic cons...
-
China High Quality Filter Bags Making Machine M...
1. The machine is easy to operate and can produce paper handles with high speed usually reach 170 pairs per minute. 2. We design and offer the optional auto-production line, which can automatic gluing replace the human gluing procedure so that help to reduce lots of labor cost. It is strongly advice the paper bag producing factory use the auto-produce line that also support customize. 3. The unit paper bag can lift the heavy things of 15 kg at most, when the tension of raw materials reaches a...
-
S/Ss/Sms Pp Spunbond Nonwoven Machine Manufactu...
Model: ZX-LT500 Non-woven Laminated Box Bag Making Leader Machine This machine adopts mechanical, optical, electrical and pneumatic integration technology, suitable for feeding the roll material of non-woven fabric and laminated non-woven fabric. It’s a specialized equipment for making the primary shaping non-woven(laminated) three dimensional bag(no need to turn the bag inside out). This equipment features stable production, strong and decent sealing of bags, good looking, top grade, fancy a...
-
Ps Food Container Production Line Factories ...
Ⅰ 105/120 PS foam sheet extrusion line includes the following components Ⅱ Main parameters Item Unit Parameter Remark Model FS-FPP105-120 Applicable materials GPPS granule Thickness of product mm 1-4 Width of sheet mm 540-1200 Foaming rate 12-20 Bulk weight of product Kg/m³ 50-83 Thermal conductivity of product W/m.k 0.021-0.038 Output kg/h 150-200 Rated power Kw 200 Power supply three phase 380v/50Hz External d...
-
China High Quality Sanitary Pads Machine Suppli...
Ⅲ.main point 1. Adapt PLC control the whole machine, operate the machine by touch screen 2. the conveyor belt can absorb the product, when it is run high speed, it will not fly 3. Cutter adapt pressure spring protect the knife from overload pressure 4. edge sealing ADL and cutter adapt the air cylinder protect the device 5. Main machine adapt frequency control the speed 6. main machine adapt bearing, timing belt, right angle gearbox, eruptional box drive 7. Cutter, ADL, edge sealing, easy qui...
